Fence Company in Portland & Vancouver WA

Fence budgeting starts with measured linear footage, not yard size. Our existing Portland cost guide puts a standard six-foot cedar privacy fence at $35–$60 per linear foot installed. A 150-foot run therefore has a planning range of $5,250–$9,000 before project-specific upgrades are resolved.

A horizontal layout, clear cedar or steel-post upgrade can move pricing toward the guide’s $65–$80-per-foot premium range. Compare quotes for the same height, lumber grade, post specification and gate configuration. A lower total is not necessarily a comparable installation if demolition or gate hardware has been left out.

• Access and terrain: slopes, rocky digging and restricted equipment access affect labor.
• Removal and disposal: the guide allows $3–$8 per foot for an existing fence.
• Gates and posts: wider openings, heavier hardware and steel supports change the scope.

Compare installed fence prices by material.

A fence in Lake Oswego, West Linn or Marylhurst needs to fit both the house and the site. Cedar privacy panels can screen a backyard, while open metal or post-and-rail designs preserve a view. We compare those choices against the boundary, changes in grade and the way gates will be used.

On a sloping property, the fence may step between posts or follow the grade. That decision affects gaps underneath, sightlines and the appearance from both sides. Trees, existing walls and drainage routes also need to be accounted for before choosing a straight run on a drawing.

We review access for removal and installation along with the proposed height and any association requirements. An old fence is not proof of a legal property line. If the boundary is uncertain, resolve it before replacing posts so the new work does not repeat a previous placement mistake.

Explore fencing in Lake Oswego and West Linn fence installation for local planning details, including nearby Marylhurst properties.

Camas, Washougal and Ridgefield properties range from compact neighborhood yards to larger lots with long boundaries. The right fence starts with its purpose: privacy near the home, safe pet containment, a garden enclosure or an open boundary that leaves the landscape visible. Different sections can serve different needs without looking unrelated.

We plan post locations, gate widths and the treatment of changing grades before ordering materials. A driveway gate places different demands on its supports than a small pedestrian opening. Wet ground, vegetation and access for digging are reviewed alongside the style so installation details are not left until construction.

Inside city limits, confirm the relevant city’s fence rules; an address outside those limits may fall under county requirements. HOA approval is a separate step from any building permit. Bring association standards and available boundary information to the estimate so height, materials and placement can be settled together.

See our Camas fencing service, Washougal fence installation and Ridgefield fence planning pages.

A leaning fence does not always need complete replacement. We look at posts, rails, boards and gate hardware separately to identify what has failed. A localized repair can make sense when the surrounding structure remains sound. Widespread rot, repeated post movement or several failing sections may make a new run more practical.

Replacement is also a chance to correct the original layout. Gate swings, narrow access points and inconsistent ground clearance can be reconsidered before new posts go in. We discuss which existing elements can remain and which should be removed, so the estimate reflects the actual scope rather than just new boards.

• Post and footing condition: identify movement or decay at the ground line.
• Panel and rail condition: check whether repairs can attach to sound material.
• Gate function: review sagging, latch alignment and the load on supporting posts.
• Removal scope: specify disposal and protection of adjacent landscaping.

Fence permission involves three separate questions: what the jurisdiction allows, where your property ends and what your association requires. A permit exemption does not waive height limits, visibility rules or private covenants. Confirm those constraints before paying for materials, especially beside a street, at a corner or near a pool.

Existing fences, landscaping and informal neighbor agreements can help start a conversation, but they do not establish a surveyed boundary. If placement is disputed or unclear, use appropriate survey information before digging. Agree on access and how each side will look without assuming that a shared boundary automatically means shared installation costs.

• Jurisdiction: check height, location, pool-barrier and retaining-wall requirements.
• Property line: resolve uncertain boundaries and locate utilities before excavation.
• HOA: obtain written approval for height, material, finish and gate design where required.

Read the fence permits and property-line FAQ.